Wiki about KME. Compensation. Sensor sensitivity.

Step 95 of 117

Sensitivity of the sensor

When carrying out Compensation, there may be a situation when excessive activity of the sensor feedback with the body field will lead to a quick (less than 1 minute of operation) shutdown of the Compensation function.
Disabling all markers is possible by changing from the primary position of the sensor in the hand, to which its sensitivity is set. And also, in case of loss of contact with the visitor field.
For high-quality operation of the sensor feedback, the System provides a function to adjust the sensitivity of the sensor feedback.

Next Exit

Step 96 of 117

If such a situation occurs, the Compensation of all markers is turned off. The button "Sensitivity" appears along with the message about the need to adjust the sensitivity.
All markers go into standby mode, which is indicated by the icon that appears within the line of each marker.
Pressing the "Sensitivity" button activates the "sensor sensitivity adjustment" function.

Exit Next

Step 97 of 117

By moving the round "adjustment knob", it is recommended to adjust the sensitivity to the approximate centerline of the indicator.
After adjusting, pressing the "Run Compensation" button prompts the continuation of the Compensation.

Next Exit

Step 98 of 117

Compensation of the selected markers continues from the time this function was stopped to adjust the sensitivity.

Next Exit